People bring Netgear wireless range extenders to their homes so that they can gain access to a seamless internet connection. But, either because of the mywifiext.net not working issue or other similar ones, they are unable to complete the Netgear extender setup process, forget about accessing the network of the device.
In case, you are also experiencing the same issue, then it is recommended that you walk through the hacks highlighted in this article. One of them will surely be able to rescue you.
[Fixed] Netgear Extender Not Connecting to Internet Issue
Check the Cable Condition
Start with the most basic troubleshooting hack, i.e. checking the condition of the Ethernet cable with which you are trying to connect the Netgear wireless range extender to the host router. In case, it is damage-free, then something else might have caused the Netgear extender not connecting to internet issue, but in case, it is damaged, then you need to make use of a new cable to connect the networking devices. Once you are done following this troubleshooting hack, see if you are able to fix the same issue. If not, continue reading.
Reduce the Unwanted Distance
Another thing that can be done to eliminate the Netgear extender not connecting to internet issue once and for all is to reduce the distance between the host router and the wireless range extender. The reason being, too much of it can make it difficult for the signals emitted by them to transmit evenly. As soon as you have brought your devices close to each other, see if you are able to access the internet. You can check this by trying to access the Netgear Genie smart setup wizard.
Let Go of Signal Interference
Considering you are reading this troubleshooting hack, it means that you are still going bonkers because of the Netgear extender not connecting to internet issue. To resolve it, you have got to keep signal interference at bay, in case it is not. And this can be done with a simple relocation of your networking device. While you are changing the location of your networking device, it is recommended that you do not keep near transmitting appliances, electronic devices, reflexive surfaces, and metal objects.
Give the Netgear Extender a Fresh Start
Technical glitches can also cause the Netgear extender not connecting to internet issue. In fact, it can also cause other issues like Netgear Genie not working, etc. To eliminate this as one of the reasons behind the issue at hand, you need to give your networking device a new start. This can be done if you power it off, count from one to ten, and then, power it on. Before you can even blink an eye, you will be able to resolve the Netgear extender not connecting to internet issue. On the off chance, you are still not able to, reset your device.
Reset the Netgear Extender
Resetting the networking device means restoring it to its factory default settings. And this can be done if you locate and press the Reset button located on it. For your information, after completing the reset process, your device will ask for a reboot. Let it reboot. Do not interrupt the process by unplugging your networking device from its existing wall socket. Done with the reboot process? Good. Now, you need to set up your networking device right from scratch using the WPS or manual method. The choice is yours.
Wrap Up
This is one can troubleshoot the Netgear extender not connecting to internet issue. Hopefully, the aforementioned hacks helped you to resolve the issue at hand. If they did, then it is recommended that you share your feedback regarding the same with your fellow readers. This can be done with ease if you make use of the comment section. Worry not. As far as we know, your fellow readers will surely like this little effort made by you. Read more.
