Did you perform Linksys RE9000 setup in your home? And now facing the Linksys extender not working issue? If your answer is yes, then you don’t need to worry about it. Here, we will assist you by providing the troubleshooting tips that work most of the time to fix the issues related to networking devices.
We recommend you stay tick with the reading and do not skip the information from it. Otherwise, you are not able to solve the extender not working issue.
Well, before we dive into the troubleshooting guide we would like to tell you about the reasons first that affect the performance of the device.
Reasons: Linksys RE9000 Not Working
Numerous reasons can occurs this issues in the extender. Here we listed only major reasons so that you can easily resolve the issue from its roots.
- An unstable internet connection from the internet service provider.
- Poor power supply from the electricity source.
- Outdated and corrupted firmware of the device.
- Wireless interference into the networking device.
- Usage of defective and worn-out cable.
- Wrong placement of the Linksys extender
Thus, these are the reasons that cause the Linksys extender not working issue. This issue can be fixed easily by implementing the troubleshooting tips.
Fix: Linksys RE9000 Not Working
Well, before you try any time-consuming hack to fix the Linksys extender not working issue we would like you to perform the reboot process first. This process works in most cases and fixes the issues related to networking devices.
Plus, you can also eliminate the temporary hiccups from the device that cause the issues in the device. To reboot the device all you need to do is unplug the power cable of the extender and have to wait for a couple of minutes. When you feel you wait for enough minutes, plug the power cable back into the socket.
Check Wired Connection
Now you should check the wired connection of the extender. Because worn out and loose connections occurs the issues in the device. To get it fixed you need to cross-check the wired connection. If you found any defective and damaged areas on the cable, then change the cable at the same time.
Inspect the Power Source
Now look at the power socket that you use to give the power supply to the Linksys extender. The power source should be damaged-free and supply sufficient power supply. So, if you find any problem with the socket, then try to use another socket for giving the electricity source.
Remove Wireless Interference
Well, if you think that the extender is the only device that broadcasts the signals, let us tell you it is just a myth. There are many household devices like electronic toys, fish tanks, cordless phones, and many more. These devices can interfere with your networking device network.
Due to such interference, the Linksys extender faces difficulties to work properly. So, all you need to do is to fix this issue and place the extender in the place where the home appliance is not installed.
Hence, these are the fixes that you can use to solve the Linksys RE9000 not working issue. In case you are still in the same situation after performing the above-mentioned hacks, then reset the device. You can take the help of the user manual if you don’t know how to reset Linksys extender.
Conclusion
We hope this write-up will assist you to fix the Linksys extender RE9000 not working issue in a hassle-free manner. Once the issue is resolved you will enjoy the seamless performance of the device.
